Gorgeous sand table model is indispensable to the rendering of light, and the design and production of light is an important part of sand table model production. And sand table model lighting is indispensable to the production of the circuit, then, how to make the sand table model lighting and circuit? Company's small editor for you to do a detailed introduction!
沙盤模型的燈光和電路是怎么制作的?
How to make the light and circuit of sand table model?
1、沙盤模型燈光制作：
1. Sand table model lighting production:
沙盤模型的燈光主要包括有建筑內燈光、環境燈光、庭院燈、路燈等。一般來說，建筑內配不同亮度、不同顏色的燈光，不同功能建筑通過燈光分區。建筑樓體分層亮燈;庭院燈采用造型美觀高亮度的觀賞燈，考慮觀賞性，比例可以適當放大;路燈要選擇主干道，道路兩側設置亮的路燈;環境燈光要在綠色叢中、花池中埋置高亮度彩色地?zé)簟?/div>
The lighting of sand table model mainly includes building interior light, environment light, courtyard lamp, street lamp, etc. Generally speaking, the building is equipped with lights of different brightness and color, and different functional buildings are divided by lighting. The building should be lit by layers; the garden lamps should be beautiful and high brightness ornamental lights, and the proportion could be appropriately enlarged considering the ornamental value; the street lamps should be selected on the main road, and the bright street lamps should be set on both sides of the road; the high brightness color floor lamps should be embedded in the green clusters and flower pools.
2、沙盤模型電路制作：
2. Sand table model circuit making:
沙盤模型中的光照來源于電能。電能來源有很多種，常見的有電池，蓄電池和太陽能電池等。具體的電源選擇要根據模型的具體情況來看。一般來說，沙盤模型中的燈光用遙控裝置來進行系統控制，遙控器上的每個遙控鍵控制特定的燈光分區，如：1號鍵控制建筑燈、2號鍵控制地?zé)舻取?/div>
The illumination in the sand table model comes from electricity. There are many kinds of power sources, including batteries, batteries and solar cells. The specific power selection should be based on the specific situation of the model. Generally speaking, the light in the sand table model is controlled by remote control device. Each remote control key on the remote controller controls specific light partition, such as building light controlled by key 1 and floor lamp controlled by key 2.
以上就是關于沙盤模型的燈光和電路是怎么制作的就介紹到這，燈光設計需要依托電源電路，在沙盤模型制作的時候也要預留出安裝電源線的孔，一般變壓器或電池等設備一般放置于底盤內部，這樣比較美觀大方。因此，需要在地盤上用電焊機焊出鏈接電源和燈具的孔。希望本文對您有所幫助，想要了解更多沙盤資訊請繼續關注濰坊模型公司http://www.transnetlivery.com網站。
The above is about how the lighting and circuit of the sand table model are made. The lighting design needs to rely on the power circuit. When making the sand table model, the holes for installing the power line should be reserved. Generally, the transformer or battery and other equipment are generally placed inside the chassis, which is more beautiful and generous. Therefore, it is necessary to weld the holes connecting power supply and lamps on the site with electric welding machine. I hope this article will help you. If you want to know more about sand table, please continue to pay attention to Weifang model company http://www.transnetlivery.com Website.
