The water surface is one of the scenes often seen in the construction of sand table model. Different sand table models reflect different water surfaces. In general, water surface models are made according to the style and share of sand table models. So, how is the water surface in the construction model made?

1、在制造修建模型份額尺較大的水面時，需求考慮水面和路面的高度差。一般一般選用的辦法是，先將底盤上水面部分進行漏空處理，然后將通明有機玻璃板或帶有紋路的通明塑料板按規劃高差貼于漏空處，并用藍色自噴漆在通明板下面噴上色彩即可。用這種辦法體現水面，一方面可以將水面與鱸魚的高差體現出來;另一方面通明板在陽光照耀和底層藍色漆面的反襯下，其仿真作用十分好。

1. The height difference between water surface and pavement shall be considered when manufacturing and building water surface with large scale of model. The general method is to first treat the leakage of the water surface on the chassis, then paste the transparent plexiglass plate or transparent plastic plate with grain on the leakage according to the planned height difference, and spray color under the transparent plate with blue self spraying paint. Using this method to reflect the water surface, on the one hand, it can reflect the height difference between the water surface and bass; On the other hand, the simulation effect of transparent board is very good under the contrast of sunlight and bottom blue paint.

2、在制造修建模型份額尺較小的水面時，水面與路面的高差就可以疏忽不計。制造時，可直接用藍色即時貼按其形狀進行裁剪。裁剪后，按其地址部位張貼即可。別的，還可以運用遮擋上色法進行處理。其做法是，先將遮擋膜貼于水面方位，然后進行漏刻。刻好后，用藍色自噴漆進行噴色。待漆枯燥后，將遮擋膜揭掉即可。

2. When building the water surface with a small scale of the model, the height difference between the water surface and the pavement can be neglected. During manufacturing, blue instant stickers can be directly cut according to their shape. After cutting, it can be posted according to its address. In addition, the occlusion coloring method can also be used for processing. The method is to stick the shielding film on the water surface first, and then make missed engraving. After engraving, spray color with blue self painting. After the paint is dry, remove the shielding film.

修建模型中水面的制造辦法十分的多，為更都好的展現修建沙盤模型的實在作用，在許多模型制造時現已紛繁選用仿真動感水來進行制造。

There are many manufacturing methods of water surface in building models. In order to better show the practical role of building sand table models, simulation dynamic water has been widely used in many model manufacturing.